Drivers

Interface Description IGSS32 offers an interface for connecting to Telemecanique equipment which supports one or more of the protocols and bustypes available through Telemecanique XWAY drivers. The XWAY suite of communication drivers range from UNI-TELWAY over FIPWAY to ETHWAY thus providing the user of a large number of networking possibilities and features. UNI-TELWAY is a […]

Interface Description The IGSS32 Siemens Simatic AS511 communication interface offers connection to Simatic S5 Series of PLCs equipped directly on the CPU port. AS511 is a proprietary Siemens protocol which is primarily used for programming Siemens S5 system. The protocol can however also be used for exchanging data with SCADA systems such as IGSS. The

Interface Description The IGSS32 Omron SYSMAC Way communication interface offers connection to all Omron PLCs supporting the SYSMAC Way protocol. SYSMAC Way is a serial protocol developed by Omron Electronics providing communication facilities for Omron’s C-series of PLCs. It is an asynchronous protocol which provides an interface for both single-link and multi-link systems by means

Interface Description IGSS32 offers an interface for IDEC IZUMI FA-Series PLC equipment. The Interface is designed to communicate with IDEC IZUMI FA-1, FA-1J, FA-2, FA-2J and FA3 series PLCs via either 1:1 peer-to-peer or 1:N network protocols. Both protocols uses standard serial RS232 ports. The IGSS32 system polls the PLC equipment cyclically according to one

Interface Description IGSS32 offers an interface for the Square-D PLC equipment. The Square-D interface is designed to connect the IGSS32 system with one or more Square-D PLCs via a PC board. The board is an interface to the Square-D SY/LINK network, and it is possible to use the board types: SFI-510, 533 and 534 (class

Interface Description The IGSS32 SAIA S-BUS communication interface offers connection to all Saia PLCs supporting the S-BUS protocol. The SAIA S-BUS protocol can be used in both direct point-to-point and multidrop configurations. It can also be used in dialled-up applications using leased lines or public tele-network. The coommunication driver uses an industri standard RS232-C serial

Interface Description The IGSS32 Comli 31 communication interface offers connection to a large number of PLCs supporting the Comli 31 protocol e.g. SattControl’s SattCon range of PLCs. Comli 31 is a serial Master/Slave protocol which can run in point-to-point, star or multi-drop network configurations. The communication interface supports both direct and dialled-up connections. The IGSS32

Interface Description IGSS32 offers an interface for BOSCH BÜEP19 and BÜEP19E compatible equipment. Both BÜEP19 and BÜEP19E are asyncronous RS-232C based point to point connections using standard serial communication ports in the PC. The IGSS32 system polls the PLC equipment cyclically according to one of four user-defined time intervals. The time intervals are configurable from

Interface Description IGSS32 offers an interface for the ABB Procontic T200 & Hitachi H Series PLC equipment using the serial HI protocol supported by ABB Procontic T200 & Hitachi H Series equipment. It is an asyncronous protocol that can only be run in point to point configuration. The communication driver uses the standard serial RS-232C

Interface Description IGSS32 offers an interface for the MJK Data Transmitter 795 equipment using COMLI protocol. COMLI is a master slave protocol that can be used in both point-to-point and in multidrop configurations. The IGSS32 driver implements direct point-to-point, dialled-up and radio connections to Data Transmitter 795. The Data Transmitter 795 is an intelligent unit