Drivers

Interface Description IGSS32 offers an interface for connecting to FT2000 and FT2000US equipment using TeleDanmark AlarmNet (TeknikNet) as network provider. The FT2000 and FT2000US equipment – typically used for monitoring and control of remote pumpstations – is connected to AlarmNet as AU terminals. IGSS32 is connected to AlarmNet as VC equipment. Virtual connections using AlarmNet […]

Interface Description The IGSS32 HMI Adapter communication interface offers connection to SIMATIC S7/300 and S7/400 PLCs using a SIMATIC S7 HMI Adapter and a standard serial RS232 port. The SIMATIC S7 HMI Adapter connects directly to the CPU port on the PLC using MPI protocol. On the PC side the HMI Adapter connects to a

Interface Description The IGSS32 Saia P8 communication interface offers connection to all Saia PLCs supporting the P8 protocol. Saia P8 protocol is a point-to-point protocol used to communicate via an asynchronious serial RS-232C interface with external devices such as PCs. The IGSS32 Saia P8 communication driver connects directly to the PGU port. Additional serial ports

Interface Description IGSS32 offers an interface for interfacing to DDE Supermax Supervision and control systems. The interface uses and TELNET connection to run the utility program GVAL on the DDE Supermax system. The GVAL utility program enables the IGSS32 communication interface to read all values stored in the DDE Supermax system. The IGSS32 system polls

Interface Description IGSS32 offers an interface for connecting to all Allen Bradley equipment supported by the Allen Bradley RSLinx software package.The communication interface makes it possible to connect IGSS32 to the following Allen Bradley processors types: PLC-5® , PLC-2®, PLC-3®, PLC-5/250™ and SLC 500, using a number of different network types.In order to use the

Interface Description IGSS32 offers an interface for PROFIBUS equipment which supports the FMS protocol. The PROFIBUS (Process Field Bus) standard (DIN 19245) is a high-performance communication system for simple and inexpensive equipment. Its functionality and dat transfer capabilities ensure the transition to high performance networks. The IGSS32 Profibus FMS driver interfaces to the ProfiBoard PC

Interface Description IGSS32 offers an interface for connecting to COMSAB II gateways. COMSAB II gives the user access to read and write data in the following SABROE compressor control units: PROSAB II, UNISAB S/R/RT/RTH and UNISAB II. The COMSAB II functions as a gateway, converting from the proprietary HDLC/RS485 protocol, which is used between the

Interface Description IGSS32 offers a TCP/IP interface for the Mitsubishi Melsec A/AnS type PLC equipment. A standard Ethernet interface board in the PC together with standard Windows TCP/IP protocol stacks enables IGSS32 to communicate with Mitsubishi Melsec A/AnS CPUs equipped with AJ71E71-S3, AJS71E71-Bx-S3 or compatible Ethernet interface modules. The IGSS32 system polls the PLC equipment

Interface Description IGSS32 offers a serial interface for the Mitsubishi Melsec A/AnS type PLC equipment. The Melsec-A communications protocol enables Mitsubishi PLCs to communicate with external devices such as computers running IGSS32, printers, CRTs etc using RS-232C and RS-422 serial interfaces. An AJ71C24 or compatible interface board must be installed in the Melsec-A/AnS PLCs in

Interface Description IGSS offers an interface for the Modicon PLC series and Modbus compatible systems using the Serial Modbus RTU and ASCII protocols. The communication driver uses standard RS-232 serial ports to connect to up to 8 PLCs. Each of these PLCs may in turn be connected to other devices (e.g. other PLCs) via a