Drivers

Interface Description IGSS32 offers an interface for connection to AI800 equipment using TeleDanmark Alarmnet (Tekniknet) as network provider.The AI800 equipment – typically used for monitoring and control of remote pumpstations – is connected to AlarmNet as AU terminals. IGSS32 is connected to AlarmNet as VBC equipment.Virtual connections using AlarmNet are supervised by Tele Danmark as

Interface Description IGSS32 offers an interface for equipment running the FPC link protocol. The driver supports direct point to point connection and incoming- and outgoing dialled-up connections. The FPC is an efficient and easy to implement protocol that allows reading and writing of multiple 16 bits data words.The FPC driver supports the standard IGSS32 dial-up

Interface Description IGSS32 TeleService interface offers dialled-up connections to SIMATIC S7/300 and S7/400 PLCs. The SIMATIC Teleservice adapter connects directly to CPU port on the PLC using the MPI protocol, and interface to the PC standard RS232C port through modems. The driver supports incoming- and outgoing dialled-up connections with standard IGSS32 dial-up features like reading

Interface Description IGSS32 offers an interface for control devices which can be connected to a P-NET Fieldbus. The interface is based upon the “VIGO – Fieldbus management system” from PROCES-DATA A/S, thereby supporting a wide range of control equipment. P-NET is a data communication standard for control equipment developed by PROCES-DATA A/S in 1983. Over

Interface Description The driver uses a GPIB IEEE 488 interface board to communicate with a B&K 1301 spectrometer.   Technical Data Electrical Interface : GPIB IEEE 488 Protocol : GPIB IEEE 488 PLC types supported : B&K1301 Supported platforms : Windows Vista, Windows XP, Windows 2003 Server, Windows 2000 PC hardware requirements : GPIB Interface

Interface Description IGSS offers a TCP/IP interface for third party TCP/IP servers. The communication driver uses a standard Ethernet or Token Ring interface board in the PC together with Windows’ TCP/IP protocol stack to access a remote TCP/IP server. The driver also supports PPP on Direct Line or Dial Up lines through the standard serial

Interface Description IGSS32 offers an interface for Ørum & Jensen PS4 equipment using COMLI protocol. COMLI is a master slave protocol that can be used in both point-to-point and in multidrop configurations. The IGSS32 driver implements direct point-to-point, dialled-up and radio connections to PS4 equipment. PS4 equipment is specially designed for failsafe and maintenance-free control

Interface Description IGSS32 offers an interface for connecting to equipment using CMM communication protocol. CMM is an asyncronious serial protocol developed for remote operation pumps, ventilators etc. All communication to the CMM is via modem. The CMM can be configured for dialing into the IGSS32 system in case of an alarm. These alarms can for

Interface Description IGSS32 offers an interface for Alfa Laval Automation (SattControl) equipment based on the SattBus Message Specification. This interface is supported by most low-, middle- and high end PLC systems from Alfa Laval Automation. SattBus Message Specification is an application layer protocol which can be used on various network types, e.g. 64 kbit/s proprietary

Interface Description IGSS32 offers an interface for connecting to Carlo Gavazzi (Electromatic) Dupline equipment. Communication is established through a D 9091 Dupline Modem interface. The D 9091 Dupline Modem provides a connection between the Dupline fieldbus and a industri standard serial RS232-C interface in the PC. Dupline is an easy-to-install 2-wire field and installationbus for