Drivers

Interface Description IGSS offers an interface for connecting IGSS to Simatic S7/400, Simatic S7/300 and S7/200 using TCP/IP network. The driver uses S7 functions for exchanging data between IGSS and Simatic S7 Series PLCs. The driver can only be used on network which allows TCP/IP traffic through port 102 (check your firewall settings). The Simatic […]

Interface Description IGSS offers an interface for the GS Fanuc SNP Communication Driver. The driver support the master protocol that can be used in both point-to-point and in multidrop configurations. The IGSS driver implements direct point-to-point, dialled-up and radio connections to PLC’s. The IGSS system polls the PLC equipment cyclically according to one of four

Interface Description IGSS32 offers an interface for the Techno Trade Modbus/TCP Communication Driver. The driver support the master protocol that can be used in both point-to-point and in multidrop configurations.. The communication interface is also capable of reading historical sampled data in TBOX PLC, thus making it possible to make reports and show graphs of

Interface Description IGSS32 offers an interface for the Techno Trade Modbus Communication Driver. The driver support the master protocol that can be used in both point-to-point and in multidrop configurations. The IGSS32 driver implements direct point-to-point, dialled-up and radio connections to PLC’s. The communication interface is also capable of reading historical sampled data in TBOX

Interface Description IGSS32 offers a driver for periodically reading of a specified CSV file. The file contains information on data type, address and date/Time. The driver will delete the file after read and wait for a new to be created by 3rd party. Technical Data Types of data : Word=0 , Dword=1 and Float=2 .

Interface Description There is presently no additional information regarding this driver available. If you require information regarding the specifics of this driver, please contact IGSS Support. Technical Data No technical data is available.

Interface Description IGSS32 offers a TCP/IP interface for the MODBUS/TCP type PLC equipment. A standard Ethernet interface board in the PC together with standard Windows TCP/IP protocol stacks enables IGSS32 to communicate with CPUs using the Open Modbus/tcp specification. The IGSS32 system polls the PLC equipment cyclically according to one of four user-defined time intervals.

Interface Description There is presently no additional information regarding this driver available. If you require information regarding the specifics of this driver, please contact IGSS Support. Technical Data No technical data is available.

Interface Description IGSS32 offers an interface for Phoenix WT45 equipment using Fernwirk Protokoll. Fernwirk Protokoll is a master slave protocol that can be used in both point-to-point and in multidrop configurations. The IGSS32 driver implements direct point-to-point, dialled-up and radio connections to Phoenix WT45 equipment equipment. The communication interface is also capable of reading historical

Interface Description The IGSS32 NetLink Adapter communication interface offers connection to SIMATIC S7/300 and S7/400 PLCs using a NetLink Adapter from HelmHolz Gmbh. The Netlink adapter connects directly to the CPU port on the PLC using MPI protocol. On the PC side the Netlink adapter connects to a standard Ethernet interface card. The IGSS32 system